Top

Innosilicon 2200W/ 220V PSU for Innosilicon T2T

USD ( or BTC; LTC )

Goods will be shipped within 3 business days after payment confirmation.

This PSU is suitable for Innosilicon T2T

Order now

Specification

1. Weight: 3kg

2. If you have ordered the PSU, please be aware: the PSU we provide fits for our miners but does not come with AC cable. You can order the standard IEC C14 AC power cable to use with the PSU.

3. T2T PSU is more than 1800W, so please purchase AC cable with 3*1.5 specifications, and 3 wire cores with diameter no less than 1.5mm.

Type Item Single Board
Output DC Voltage 12V, 10.5-14V
Rated Current (220V input) 60A
Rated Power (220V three input) 2200W
Maximum Total Output Power 2300W
Ripple Noise <210MV
Voltage Accuracy <1%
Voltage Regulation <1%
Setup, Rise Time <500MS
Power off Protection Trip Time >10MS
Input Voltage Range 200-264V
Frequency Range 50-60HZ
Power Factor >0.99
Leakage Current <1.5MA(220V 50HZ)
Protection Low-voltage Protection ≤190V
Output Short Circuit Yes
Output Overcurrent Yes
Overheat Protection Yes, self-recovery
Protection Output Short Circuit Yes
Output Overcurrent 160-180A
Overheat Protection Yes
Environment Conditions Operating Temperature -25-55℃
Altitude ≤5000M
Operating Humidity 20%-90% relative humidity (non-condensing)
Efficiency Full Load Output ≥93%
Structure Dimensions 300mm*135mm*63mm
Cooling Fan
Noise 40DB

Shipping

1. Delivery time: first pay, first served.

Goods will be shipped within 3 business days after payment confirmation.

2. Please write the recipient's name, contact information and address carefully. We will ship according to the information given to us. You will be responsible for any damages or losses caused by errors in the information.

3. We guarantee the safety of the goods until they are in the hands of the shipping carrier. Once the shipping carrier has accepted the goods, the ownership of them will be transferred to customers. Any damages or losses after that shall be borne by customer side.

4. In order to increase the in transit security of the high-value miner, we are implementing insurance fees with the shipping fees, starting from December 26th, 2017. We will use the company name (if not available, then the name of the buyer) as the insured party. Please make sure that the information is correct.

Contact us

Warranty

Sales of miner parts are different from the general consumer electronics products, which are specially customized according to customers’ needs. Please notice before purchase. The after-sales service policy is as follows. After payment, the product cannot be returned or refund.

180 days parts warranty for any miners directly purchased from Innosilicon. If any problem, please leave an after-sales message on our message board. Our technical support team will get in touch with you asap.

The price of PSU may be adjusted at any time without prior notice or price compensation to customer.

The warranty expires in the following cases:

  • Product is demolished, privately altered or component replacement by customers.
  • Lightning, voltage surges, poor quality power supply causing damage.
  • Circuit boards and components damaged by water, exposed to moisture or corroded.
  • If above case happens, services of your miner maintenance will be charged.
  • For the specific procedures, please refer to the after-sales process.

Buy Now